Sun-Torque Solar Brushless Surface Mount 4.2-60 | 4200L/hr | 60M Head - Image 1
Sun-Torque Solar Brushless Surface Mount 4.2-60 | 4200L/hr | 60M Head - Image 2
Sun-Torque Solar Brushless Surface Mount 4.2-60 | 4200L/hr | 60M Head - Image 3
Sun-Torque Solar Brushless Surface Mount 4.2-60 | 4200L/hr | 60M Head - Image 4
Sun-Torque Solar Brushless Surface Mount 4.2-60 | 4200L/hr | 60M Head - Image 5

Sun-Torque Solar Brushless Surface Mount 4.2-60 | 4200L/hr | 60M Head

Submersible Multistage 3 Phase AC Pump | 6.6m?/hr Max Flow | Max Head 234m | 3.7kW Pump Drive | 4SP5-38
Awaiting product image Pylontech US3000c Battery Cabinet (Fits 5 Batteries)

From $2,150.00

SKU: JETS-4.2-60-1 Category:

Description

When you need to push a reasonable amount of water you have a bit of a hill to push up the Sun-Torque 4.2-60 is the pump for the job. This pump can deliver a maximum of 4200 litres per hour or a maximum total head of 60 metres.

Whether you’re pumping from a channel, dam, tank or other this Solar surface mount pump is a ripper in performance and reliability. This pump runs solely from Solar included in your kit is the pump, MPPT controller and your choice of Solar panels. This pump will run well with 4 panels, you can run it with 6 panels for a longer pumping day the pump will also perform better on cloudy days with the extra 2 panels.

Please refer to our pump calculator to get your total head & compare to the curve graph for head & flow ranges. On surface mount pumps we recommend not exceeding 65% of maximum head height for this pump that is 39m.

Package Includes:

  • 750W Brushless DC Surface Mount Pump
  • MPPT Sealed Solar Pump Controller
  • Solar Panels to suit – (choose from dropdown menu)
  • Well Sensor to?stop?pumping if the?water source is low
  • Tank Sensors to stop pumping if the tank is full
  • 5 Metre Cable for Solar Panel
  • Instruction Manual

Specifications:

  • Max flow rate: 4200 litres per hour?/ 70 litres per minute
  • Max head (vertical pumping distance): 60 metres
  • Voltage – 48v
  • Pump power 750W
  • Pump Outlet: 1″
  • Stainless Steel Pump, Motor & Screw
  • NSK Bearings
  • Brushless DC Pump Motor

Optional extras:

  • 4 or 6 panel stand to mount solar panels.
  • Railing/connectors take all the hard work out of building your own stand, they connect to the solar panels and bolt straight onto your own stand.
  • Pressure switch kit if you?re filling a tank that is some distance from where you?re pumping from. The switch that comes with the system is wired whereas there is an option to purchase a mechanic pressure switch that doesn?t require a cable.
  • Extra cable. Pump comes with 3 metres of cable on it if you need
    more calculate the distance from where you?re pumping from to where you will
    mount the controller. Maximum 80 metres extra cable for this pump.

[insert page=’commodore-pump-warranties’ display=’content’]