Description

We offer pressure switch kits that come with and without pressure tanks. If you are pumping to a tank(s) or trough(s) then we recommend that you don’t purchase this kit, instead get the pressure switch kit without a tank. You only need a pressure tank when you are pumping directly to taps or sprinklers, in this instance the pump will remain off until you turn on the tap which the difference in pressure will be detected and will run the pump until you turn the tap off. This is also a good option when you’re running timers for irrigation systems, when the irrigation timer activates the pressure will be detected and will run until the timer turns it off.

This kit is for the low pressure 10 bar kit, this is when you’re using our pumps that are on the lower side of head range.

10 BAR Pressure Switch:
Operational range – 1BAR (14PSI) to 10 BAR (143PSI)
Differential range – 1BAR (14PSI) to 3BAR (43PSI)

Package Includes:

• 19L Pressure Tank (Max Pressure: 1000kPa -Connection Size: 25mm)
• 5-way Brass Tee (1x 1″ male + 2x 1″ female + 1x male 1/4″ BSP + 1x female 1/4″ BSP)
• Pressure Gauge with male 1/4″ BSP thread
• Adjustable 10 bar Pressure Switch 10 -140 PSI with female 1/4″ BSP thread
  • Does not arc when opening or closing – as there is only a signal contact to the controller – no large current as with normal AC pump pressure switches.