Commodore is excited to provide internationally trusted Victron Products. The MultiPlus 48/3000/70-50 230V VE.Bus is a highly developed inverter charger which makes moving to solar a more simpler change through the combination of a battery charger, and inverter, along with the many fantastic Victron features. All Victron equipment includes a 5 year warranty, and with Commodore’s lifetime support, we are truly here to help you. The rest of the MultiPlus impressive features are listed below.
Inverter and charger specs:
- Output 230VAC
- Frequency 50Hz
- Continuous output at 25C 3000VA
- Continuous output at 25C 2400W
- Continuous output at 40C 2200W
- Continuous output at 65C 1700W
- Peak power 6000W
- Maximum efficiency 95%
- Zero load power 20W
- Charge voltage absorption 57V, 6V
- Storage mode 52V, 8V
- Charge current house battery 9 Amps
- Battery temperature sensor Yes
The MultiPlus is a highly advanced inverter, and features:
- Programmable relays
- Protection for short circuits, overloads, high battery voltages, low battery voltages, high temperatures, ineffective voltage ripples
- 2 AC ports
- 16A Transfer switch
- VE Bus Communication Port this allows remote monitoring and system integrations to be made
The inverter meets EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1 safety standards, and also satisfies EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 emission standards.
The MultiPlus can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The MultiPlus will automatically connect to the active source.
Two AC Outputs
The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the MultiPlus takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the MultiPlus. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Virtually unlimited power thanks to parallel operation
Multiplus can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.