Call for a free quote 1300 669 256 | Drought affected? We are trying to help. (Click here to find out how)

Menu
Save $925.00!

Off Grid Solar Kit 3360W Solar | 19.2kWh GEL Bank | 5KVA/4kW Inverter/Charger

$12,875.00 $11,950.00

Compare

Complete Off Grid Solar Power System Kit – 3360W Solar PV & 19.2kWh AGM Battery Bank

Off Grid Solar Systems Shipping Australia Wide

This stand alone renewable energy package uses 12x 280w A Grade CEC approved bushfire rated solar panels & 8x 200Ah 12v Ritar Sealed GEL Deep Cycle maintenance free batteries.

On average, there will be 15kW-hours of power available from the solar array per day – based on 5hrs of effective sunshine per day. More sunshine = more power. This large solar PV design principle reduces the amount of time the batteries will be low on charge, which maximises their life expectancy & provides far more reliable power.

Estimate your system requirements using our off-grid calculator.

When there is no sunshine or badly overcast weather, the battery reserve capacity will give the following power from full charge down to 50% remaining capacity:

  • 9.6Kwh in 24 hours, or
  • 4.8kWh per day for 2 days, or
  • 3.2kWh per day for 3 days, or
  • 2.4kWh per day for 4 days

The solar array can then recharge the battery bank from 50% flat in around 4 hours of effective sunshine, depending on any loads running on the system at the same time. A generator can be used to recharge the battery bank and run loads through the inverter too.

The GEL Deep cycle batteries have an exceptional cycle life of around 1200 cycles to 50% discharge, which means the batteries could last around 9 years if they’re discharged to 50% every three days at worst, kept insulated from temperature extremes and not left in a discharged state for periods of time.

Package Includes:

  • 12x 280w A grade Mono / Poly Crystalline CEC approved Solar Panels
  • 5KVA/4kW Solar Inverter Charger with 60A AC Charger & 60A MPPT Solar Controller
  • 8x 200Ah GEL/ AGM Sealed Deep cycle batteries (19.2kWh total, 9.6kWh to 50%)
  • DC Fuse Disconnect / Battery Breaker & Fuses to suit
  • DC Solar PV breakers & Housings
  • 5 Metres of Battery Cabling 25mm2 – 4x 1.25m Lengths with lugs to suit the kit
  • 40 Metres of Solar Cable – 2x 20m fitted with MC4 connectors for easy installation
  • Spare Solar Cable & Connectors – should you need to extend any cabling between the PV strings
  • Solar Panel racking to suit Tin roof (Tile roof & Tilt frame options are available)
  • Solar Safety Label Sticker Kit

Create a Grid-Hybrid system, where your Solar energy is used & stored as first priority. Power will be supplied primarily from the solar panels & battery bank. If there is insufficient power, the inverter switches over to the Grid AC power supply automatically. This design principle uses your solar & stored energy first before reverting back to the grid power. This can be more feasible than the low grid feed-in tariff typically on offer. The inverter will switch over to mains AC power on a battery capacity or voltage level which can be set on the LCD screen. A generator can be used in place of grid power for charging the batteries and running loads in the event of a few cloudy days or some heavy power usage.

Create a Backup Power System or UPS – With the inverter set to AC priority mode, power will be normally supplied from the mains AC power. If there is a black-out or mains fault, the inverter will switch over to solar & battery to supply power. The solar panels and mains power will keep the batteries full of charge so they are at full capacity whenever a power failure happens.

Please note this system will not feed energy back into the grid! Instead, all your solar energy harvest is used by your household with solar priority mode. The inverter can also charge the battery bank from AC power if there has not been enough sunny days. In AC priority mode, the inverter will supply pure sine wave power from the AC input, & switch over to solar / battery power in the event of an AC input power failure.

Besides the front LCD, this inverter charger can be connected to a computer (software & cable included) to get detailed information about your energy harvest, battery sate & power usage. Settings can also be adjusted via either the LCD or the Software from a PC.

Please contact us for very competitive freight quotes!

Please note this listing does not include installation. Installations exceeding 500VA should be done by a qualified electrician, in accordance to electrical safety requirements of your state or territory.

Visit our battery warranties page to view the warranties we have on our batteries.

Solar panels feature a 25 year pro-rata year warranty, inverter / charge controller a 1 year full warranty, and all other items come with a minimum 12 month warranty. For more information see manufactures warranty, found on each brand website.

You are welcome to send any faulty goods back and our factory trained staff will carry out repairs for you free of charge within the warranty period. Shipping is cost of buyer.

Consumables, cables, leads, etc.. are not covered by warranty, negligence or misuse is a warranty exclusion. Commodore is not responsible for any direct or indirect expenses or losses related to warranty or non warranty.

Registered Responsible supplier with ERAC, Alternative Technology Association of Australia 

 

Weight700 kg
Dimensions165 × 100 × 40 cm

System Requirements

Click here to estimate your system requirements using our off-grid calculator

Battery Warranty

For battery warranties click here

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

icon

Quality Support

Over phone, e-mail or in person.

icon

Free Quote

Call for free quote.

icon

Free Shipping

Free shipping on many items.